Metallic powder coatings are decorative protective finishes for Metal Coating Company. The multi-colored metallic powders are frequently applied with single application, and then its top-coated with clear powder to further improve the finish even more.
Metallic and mica powder coatings contain metal flake or mica particulate matter that offers these coatings their special appearance. These flakes and particulars certainly are a freestanding component. Metallic and mica powder coatings are homogeneously combined with basics color powder and so are termed as Dry-Blended powders. These come in Epoxy, Hybrid, Urethane, and TGIC Polyester chemistries.
The down sides confronted with dry-blended powders are with color consistency, limited penetration in recessed areas, as well as their limited ability to be recycled. Dry-blended powders tend to be applied employing a corona gun with a flat spray nozzle. Metallic and mica powder coatings are processed by physically bonding them to the top of the powered coating. Generally, all the metallic or mica particles are bonded, however some will not be firmly attached and might cause various problems in the finishing process.
Bonded metallic and mica powder has fewer lines than dry blended powders and they are more readily recyclable. Moreover, they also provide color that is more consistent after recycling and fewer picture frame effect, and also a better penetration and better transfer efficiency. Despite the fact that bonded metallic and mica powder could be reclaimed, it is always better to minimize the ration of reclaimed powder to virgin powder so that you will produce the ideal finish. Bonded powders can be found in Epoxy, Hybrid, Urethane, and TGIC polyester chemistries.
Metallic powders may have some drawbacks connected with them. The first being that aluminized powder finishes do have a tendency to look weathered as time passes. Another drawback is loading, which can be an uncontrollable lack of electrostatic high-voltage power in the tip from the spray gun and occurs since the metallic powder has produced a ground path with the powder hose to the high voltage traveling. To lower loading, a engineered spray muzzle can be used if the quantity of Curing furnace from the powder is not excessive.
Using metallic powder has become the main cause of several spray booth fires. Spice powder coatings are unique blends of multiple finished powder colors, producing a highly aesthetic and protective coating. These multi-colored powders are available in Epoxy, Hybrid, Urethane, and TGIC Polyester chemistries. Spice powder coatings are most often utilized for end use applications including casual furniture, shelving, case goods, and leisure equipment. However, spice powder dacronet can be used for other items.
Spice powder coatings do pose some challenges for the applicator when compared to the use and implementation of smooth, solid color powders. Therefore, applicators have to apply a consistent and even pattern to assure film thickness consistency and provide an excellent appearance. Because of the nature of the spice powder coatings, the color and appearance may vary when the powder is reclaimed. In addition, substrate density may affect flow and appearance in the finished product.
Since metallic powder with this type is created with the addition of pure finely ground mica or aluminum or bronze particles, you might be actually spraying a mix of the plastic powder as well as the Diamond wire cutting fluid mixed with it. With different guns the metallic particles in relation to the floor object may orient themselves differently. The orientation of the aluminum particles will determine the last finish.